search

Direct Color Systems Directjet 1014UV Información técnica Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 39
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
Go to table of contents
DCS_Direct_Jet_1024UV_1014UV_Maintenance_Troubleshooting_Guide_2.1.docx 8 | Page
MAINTENANCE and CLEANING
When powering the printer back on, remember to turn on the main power then wait 5 seconds before
powering up the print engine. This is to allow time for the LED light to calibrate its distance from the print
head.
Although your Direct Jet printer is engineered to provide many years of trouble-free operation, regular
cleaning and periodic maintenance are required to keep your machine running smoothly.
BEGINNING OF THE DAY
Page
√
Turn on main power (wait 5 seconds)
9
√
Inspect spit tray – clean as needed
9
√ Shake white ink (before turning on print engine) 9
√
Power up the print engine 9
√
Achieve a correct nozzle check
9
√
Correct missing nozzles if necessary
15
END OF THE DAY
√ Achieve a correct nozzle check 9
√
Clean gaskets on capping station 9
√
Power down print engine
√
Turn off main power
9
√
Check the ink waste tray
9
√ Complete Maintenance Log 40
BEGINNING OF THE WEEK
√
Turn on main power (wait 5 seconds) 9
√
Shake white ink (before turning on print engine)
9
√
Power up the print engine
9
√ Reset Waste Ink Pad Counter and power cycle print engine 9
√
Inspect spit tray – clean/replace as needed
9
√
Clean and lubricate print station X-axis shafts and rails 10
√
Clean the UV lamp
12
√
Lubricate Y-axis rails
12
√
Achieve a correct nozzle check 9
√
Clean print head encoder strip for X-axis 13
√
Clean the wiper blade
13
END OF THE WEEK
√
Achieve a correct nozzle check
9
√ Power down print engine
√
Turn off main power 9
LONG TERM MAINTENANCE
√
Run a nozzle check once per week (if printer is idle)
9
√
Inspect intake fan filter on UV lamp and replace as necessary
13
√ Replace syringes and filling needles every 28 days 14
√
Clean encoder wheel for Y-axis every 84 days 14
√
Replace capping station every 84 days
16
√
Replace cartridges every 84 days
14
See the Maintenance Log for a printable checklist. You will be required to present a completed
maintenance log for any tech support and warranty requests. Find the printable log at the end of this
document.
T
A
S
K
O
V
E
R
V
I
E
W
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Impresión y escaneo Direct Color Systems Directjet 1014UV
Impresión y escaneo Direct Color Systems Directjet 1014UV Información técnica   (21 paginas)
Impresión y escaneo Direct Color Systems Directjet 1014UV Manual de usuario   (4 paginas)
  • Quintum Moultrie Marten DK Digital Star-lights
  • Garmin Estroboscopios y luces de discoteca Gigabyte Software de gestión de sistemas Nortel Networks Software MTD Cortadoras De Césped Hoshizaki Ventiladores domésticos
  • Electrolux EOB9851XAX Philips 226V3LAB5/01 Watlow EZ-ZONE PM LG GR-J31FWCHL Cradlepoint CBA250
  • HP EliteBook Folio 1040 G2 Notebook PC Manual de usuario Viking Designer Series Guía de instalación Brother PR-600 Manual de instrucciones